17 Best Double Coated Tapes

 

Polyken 105CNAT1536 105C Multi-Purpose Double Coated Carpet Tape 1-12 x 36 yd Natural #ad
Polyken 105C/NAT1536 105C Multi-Purpose Double Coated Carpet Tape: 1-1/2″ x 36 yd, Natural
Polyken 105C/NAT1536 105C Multi-Purpose Double Coated Carpet Tape: 1-1/2″ x 36 yd, Natural #ad - Premium quality, double-sided tape on a cloth carrier that can be removed cleanly from most surfaces with no leftover residue the residue-free easy removal feature makes the tape popular as a temporary flooring and carpet hold-down in exhibition and convention halls it’s the perfect answer when you need short-term special event flooring and must leave a clean surface behind the residue-free easy removal feature makes the tape popular as a temporary flooring and carpet hold-down in exhibition. Adhesive rubber carrier/backing cloth release liner low-density polyethylene (ldpe) film thickness 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner) adhesion 40 ounces per inch (to stainless steel test panel) tensile strength 20 pounds per inch (longitudinal). Service/operating temperature 40°f to 200°f outdoor yes indoor yes moisture resistant yes standards met boeing bac5034-4 section 51a(1)(a) can contribute toward satisfying eq credit 41 (low emitting materials) under leed core 3 inch diameter. Note before applying this double-coated tape to a surface area, first test it in a small, inconspicuous area to ensure that it can be removed as desired this tape is designed to not leave adhesive residue behind however, depending on certain conditions such as chemical cleaners used on the floor, length of time and the substrate’s composition, it may still pull up loose debris or finish from the surface. Tape rolls are typically cut to standard tape industry metric-cut sizes, or approx 5% narrower than the nominal size (ie 24mm per 1-inch of nominal width ordered) polyken 105c carpet tape comes on a blue film liner for added visibility when used over a large area for the same product on an easy to use paper release liner, try polyken 105c-p, consider this for smaller jobs.

 

Polyken NAT07536 Multi-Purpose Double Coated Carpet Tape 36 yards Length x 34 Width Natural #ad
Polyken NAT07536 Multi-Purpose Double Coated Carpet Tape, 36 yards Length x 3/4″ Width, Natural
Polyken NAT07536 Multi-Purpose Double Coated Carpet Tape, 36 yards Length x 3/4″ Width, Natural #ad - Premium quality, double-sided tape on a cloth carrier that can be removed cleanly from most surfaces with no leftover residue the residue-free easy removal feature makes the tape popular as a temporary flooring and carpet hold-down in exhibition and convention halls it’s the perfect answer when you need short-term special event flooring and must leave a clean surface behind the residue-free easy removal feature makes the tape popular as a temporary flooring and carpet hold-down in exhibition. Service/operating temperature 40°f to 200°f outdoor yes indoor yes moisture resistant yes standards met boeing bac5034-4 section 51a(1)(a) can contribute toward satisfying eq credit 41 (low emitting materials) under leed core 3 inch diameter. Tape rolls are typically cut to standard tape industry metric-cut sizes, or approx 5% narrower than the nominal size (ie 24mm per 1-inch of nominal width ordered) polyken 105c carpet tape comes on a blue film liner for added visibility when used over a large area for the same product on an easy to use paper release liner, try polyken 105c-p, consider this for smaller jobs. Note before applying this double-coated tape to a surface area, first test it in a small, inconspicuous area to ensure that it can be removed as desired this tape is designed to not leave adhesive residue behind however, depending on certain conditions such as chemical cleaners used on the floor, length of time and the substrate’s composition, it may still pull up loose debris or finish from the surface. Adhesive rubber carrier/backing cloth release liner low-density polyethylene (ldpe) film thickness 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner) adhesion 40 ounces per inch (to stainless steel test panel) tensile strength 20 pounds per inch (longitudinal).

 

3M Double Coated Tape 9500PC 075 x 36 yd 56 mil Clear Pack of 48 #ad
3M Double Coated Tape 9500PC, 0.75″ x 36 yd 5.6 mil, Clear (Pack of 48)
3M Double Coated Tape 9500PC, 0.75″ x 36 yd 5.6 mil, Clear (Pack of 48) #ad - Electronics, general industrial, appliances, medical devices, power tools, automotive, transportation, aircraft, airplane. 3m performance standard, moisture stability and economical edge burr during hard tool die cutting. For adhering, affixing, assembling, attaching, bonding, converting, cushioning, fastening, fixturing, gasketing, gluing, holding, identifying, ingress protecting, insulating, isolating and more. Excellent solvent resistance and adhesion to low surface energy materials. High bond to low surface energy lse substrates, powder coated paints and oily metals used for joining materials that are relatively smooth, thin and have low residual stress.

 

3M 9629PC Circle-0625-250 Double Coated Tape 0625 Diameter Circle Roll of 250 #ad
3M 9629PC Circle-0.625″-250 Double Coated Tape 0.625″ Diameter Circle (Roll of 250)
3M 9629PC Circle-0.625″-250 Double Coated Tape 0.625″ Diameter Circle (Roll of 250) #ad - Quick bonding time. Constructed with a clear pet carrier for dimensional stability. Excellent adhesion to hdpe, ldpe, and pp. Resistance to the effects of high temperatures, solvents, humidity, uv exposure, and water once applied. Suitable for high bonds on low surface energy plastics and powder coated paints.

 

Polyken NAT336 Multi-Purpose Double Coated Carpet Tape 36 yards Length x 3 Width Natural #ad
Polyken NAT336 Multi-Purpose Double Coated Carpet Tape, 36 yards Length x 3″ Width, Natural
Polyken NAT336 Multi-Purpose Double Coated Carpet Tape, 36 yards Length x 3″ Width, Natural #ad - Note before applying this double-coated tape to a surface area, first test it in a small, inconspicuous area to ensure that it can be removed as desired this tape is designed to not leave adhesive residue behind however, depending on certain conditions such as chemical cleaners used on the floor, length of time and the substrate’s composition, it may still pull up loose debris or finish from the surface. Premium quality, double-sided tape on a cloth carrier that can be removed cleanly from most surfaces with no leftover residue the residue-free easy removal feature makes the tape popular as a temporary flooring and carpet hold-down in exhibition and convention halls it’s the perfect answer when you need short-term special event flooring and must leave a clean surface behind the residue-free easy removal feature makes the tape popular as a temporary flooring and carpet hold-down in exhibition. Tape rolls are typically cut to standard tape industry metric-cut sizes, or approx 5% narrower than the nominal size (ie 24mm per 1-inch of nominal width ordered) polyken 105c carpet tape comes on a blue film liner for added visibility when used over a large area for the same product on an easy to use paper release liner, try polyken 105c-p, consider this for smaller jobs. Service/operating temperature 40°f to 200°f outdoor yes indoor yes moisture resistant yes standards met boeing bac5034-4 section 51a(1)(a) can contribute toward satisfying eq credit 41 (low emitting materials) under leed core 3 inch diameter. Adhesive rubber carrier/backing cloth release liner low-density polyethylene (ldpe) film thickness 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner) adhesion 40 ounces per inch (to stainless steel test panel) tensile strength 20 pounds per inch (longitudinal).

 

Polyken 105C-P Multi-Purpose Double Coated Carpet Tape 1 in x 75 ft Natural #ad
Polyken 105C-P Multi-Purpose Double Coated Carpet Tape: 1 in. x 75 ft. (Natural)
Polyken 105C-P Multi-Purpose Double Coated Carpet Tape: 1 in. x 75 ft. (Natural) #ad - Polyken 105c-p paper liner carpet tape is used for carpet hold-down for convention and entertainment industry, hanging or seaming polyethylene sheets for construction or abatement, securing garments to a pallet in lieu of spray adhesive in screen printing, and temporary holding applications for industrial use this is a high quality, double-sided cloth tape on a white paper liner used for carpet hold down and mounting (used to replace tack strips). Standards met boeing bac5034-4 section 51a(1)(a) can contribute toward satisfying eq credit 41 (low emitting materials) under leed carrier/backing cloth adhesive rubber release liner white paper thickness 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) adhesion 40 ounces per inch (to stainless steel test panel) tensile strength 20 pounds per inch (longitudinal) service/operating temperature 40f to 200f voc content < 1 g/l core 3-inch diameter. Before applying this double-coated tape to a surface area, first test it in a small, inconspicuous area to ensure that it can be removed as desired this tape is designed to not leave adhesive residue behind however, depending on certain conditions such as chemical cleaners used on the floor, length of time and the substrate's composition, it may still pull up loose debris or finish from the surface. Even though the tape is designed to remove adhesive-residue free it still does offer 40 ounces per inch of peel adhesion so some customers alternatively use the tape as a type of lint roller to pull up loose residue from a surface. Polyken 105c-p double-sided cloth tape is supplied on a paper liner instead of a standard film liner the paper liner is typically easier to remove although it may have a tendency to rip when applying the tape across large areas, whereas a film liner would not due to the non-elastic properties of the paper liner vs the flexible cloth, the 105c-p may show gaps in the roll when they are cut to width which does not in any way affect the physical properties of the tape.

 

3M 66511296 665 Double-Coated Tape 1 in x 36 yards Clear #ad
3M 66511296 665 Double-Coated Tape, 1 in. x 36 yards, Clear
3M 66511296 665 Double-Coated Tape, 1 in. x 36 yards, Clear #ad - The foam dampens and prevents vibration. 3m, 4026 double coated urethane foam tapes, 75 mm x 9yard, 11mm thick. High shear adhesive with high temperature resistance. Off-white open-cell, flexible urethane foam carrier fills gaps and helps bond to irregular surfaces. Durable foam is ideal for interior mounting applications.

 

JV Converting DC-UHB45FA-GGRY0536 JVCC DC-UHB45FA-G Ultra High Bond Double Coated Tape 12 x 36 yd Grey #ad
J.V. Converting DC-UHB45FA-G/GRY0536 JVCC DC-UHB45FA-G Ultra High Bond Double Coated Tape: 1/2″ x 36 yd, Grey
J.V. Converting DC-UHB45FA-G/GRY0536 JVCC DC-UHB45FA-G Ultra High Bond Double Coated Tape: 1/2″ x 36 yd, Grey #ad - Adhesion 139 ounces per inch (to stainless steel test panel) tensile strength 85 pounds per inch (longitudinal) service/operating temperature -40f to 212f dynamic shear strength 85 pounds per square inch short term temperature resistance up to 320f core 3-inch diameter plastic. Jvcc uhb45fa-g ultra high bond double coated tape is constructed of a grey foamed acrylic system which has excellent all-around bonding properties which allows for very high performance in the most demanding of applications ideal for structural bonding applications in the transportation industry used in automotive aftercare market and in body shops for crash repair as well as mounting/fixing car side molding and emblems. The pressure-sensitive acrylic composition has very good tack has excellent adhesion to a variety of surfaces and has high shear strength performance the tape is carried on a red, release coated polyethylene liner that is easily removed has good uv resistance the dwell time the tape needs to be in contact with both surfaces before it reaches its maximum adhesion is 1 to 24 hours. The tape will bond to most surfaces including many plastics, composites, sealed woods, and metals however thorough evaluation is recommended when bonding to low energy surface material such as polyethylene, polypropylene, silicones, and teflon for lower energy surfaces may need to use an adhesive promoter/primer such as ipa (isopropanol) on the substrate prior to application. Carrier/backing foamed acrylic adhesive ultra-high bond acrylic release liner red polyethylene film thickness 433 mils (carrier, adhesive).

 

Double Coated Thin Scrim Tape 24 mil 54606 Size1 24mm x 60Yd-48 Rolls Per Case #ad
Double Coated Thin Scrim Tape 2.4 mil (54606) (Size:1″ (24mm) x 60Yd-48 Rolls Per Case)
Double Coated Thin Scrim Tape 2.4 mil (54606) (Size:1″ (24mm) x 60Yd-48 Rolls Per Case) #ad - Gold siliconized paper release liner. Scrim reinforcement provides for improved lay down. Temperature resistance -40°f up to +212°f. A high tack, clear polyester (pes/pva) scrim tape. The adhesive system of this double coated tape has excellent tack combined with a high adhesive strength, and will bond well to nearly all materials even to difficult surfaces like low surface energy substrates, foams, pe and pp films. 8 oz/in. Used for permanent bonding of various materials such as fabrics, wallboard, plastic, metal and wood surfaces. 4 mil (0. Double coated thin scrim tape 2. Also used to laminate foams and films. Color clear, gold liner adhesion 65. It has excellent temperature, uv, aging, and water vapor resistance. The scrim is coated on both sides with a solvent free water base modified acrylic adhesive. Its thin characteristic makes it suitable for low-relief laminations. Acrylic adhesive provides long term performance. 06mm) exclusive of 90 gr.

 

Polyken 105C Multi-Purpose Double Coated Duct Tape 20 lbsin Tensile Strength 75 Length x 4 Width Natural #ad
Polyken 105C Multi-Purpose Double Coated Duct Tape, 20 lbs/in Tensile Strength, 75′ Length x 4″ Width, Natural
Polyken 105C Multi-Purpose Double Coated Duct Tape, 20 lbs/in Tensile Strength, 75′ Length x 4″ Width, Natural #ad - Premium quality, double-sided tape on a cloth carrier that can be removed cleanly from most surfaces with no leftover residue the residue-free easy removal feature makes the tape popular as a temporary flooring and carpet hold-down in exhibition and convention halls it’s the perfect answer when you need short-term special event flooring and must leave a clean surface behind the residue-free easy removal feature makes the tape popular as a temporary flooring and carpet hold-down in exhibition. Service/operating temperature 40°f to 200°f outdoor yes indoor yes moisture resistant yes standards met boeing bac5034-4 section 51a(1)(a) can contribute toward satisfying eq credit 41 (low emitting materials) under leed core 3 inch diameter. Note before applying this double-coated tape to a surface area, first test it in a small, inconspicuous area to ensure that it can be removed as desired this tape is designed to not leave adhesive residue behind however, depending on certain conditions such as chemical cleaners used on the floor, length of time and the substrate’s composition, it may still pull up loose debris or finish from the surface. Tape rolls are typically cut to standard tape industry metric-cut sizes, or approx 5% narrower than the nominal size (ie 24mm per 1-inch of nominal width ordered) polyken 105c carpet tape comes on a blue film liner for added visibility when used over a large area for the same product on an easy to use paper release liner, try polyken 105c-p, consider this for smaller jobs. Adhesive rubber carrier/backing cloth release liner low-density polyethylene (ldpe) film thickness 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner) adhesion 40 ounces per inch (to stainless steel test panel) tensile strength 20 pounds per inch (longitudinal).

 

3M 9088 Circle-0375-250 Clear Acrylic High Performance Double Coated Tape 00083 Thick 0375 Length 0375 Width Pack of 250 #ad
3M 9088 Circle-0.375″-250 Clear Acrylic High Performance Double Coated Tape 0.0083″ Thick, 0.375″ Length, 0.375″ Width (Pack of 250)
3M 9088 Circle-0.375″-250 Clear Acrylic High Performance Double Coated Tape 0.0083″ Thick, 0.375″ Length, 0.375″ Width (Pack of 250) #ad - Excellent initial adhesion. Excellent adhesion to both high and low surface energy substrates. Used for high performance bonding typically with pop displays, metal fabrication, indoor/outdoor signs, blister packs and nameplates. High level adhesive peel and shear performance. Resists solvents, uv rays, and plasticizers.

 

3M Double Coated Tape 9832 Clear 1 12 in x 60 yd 48 mil #ad
3M Double Coated Tape 9832, Clear, 1 1/2 in x 60 yd, 4.8 mil
3M Double Coated Tape 9832, Clear, 1 1/2 in x 60 yd, 4.8 mil #ad - Used on particle board, melamine, hpl, wood, plywood, plastics and foam. Tan 58 lb polycoated kraft paper liner offers die cutting and converting process capability. Thin 05 mils (01 mm) polyester film carrier adds dimensional stability and improved handling. Temperature performance up to 250°f (121°c) for short term exposure and up to 150°f (66°c) for long term exposure. Provides excellent adhesion to a wide variety of substrates, including many foams, plastics, and felt.

 

TRU DC-5227X Double Sided Exhibition Carpet Tape And Multi Purpose Double Coated Tape Indoor and Outdoor 36 Yards Length Available In Multiple Sizes 2 in Pack of 1 #ad
T.R.U. DC-5227X Double Sided Exhibition Carpet Tape And Multi Purpose Double Coated Tape. Indoor and Outdoor. 36 Yards Length. (Available In Multiple Sizes). (2 in. (Pack of 1))
T.R.U. DC-5227X Double Sided Exhibition Carpet Tape And Multi Purpose Double Coated Tape. Indoor and Outdoor. 36 Yards Length. (Available In Multiple Sizes). (2 in. (Pack of 1)) #ad - Used extensively in the convention and trade show industry as it will leave no adhesive residue upon removal from most substrates. Used for carpet hold-down and other general purpose uses in aircraft mfg. Moderate track natural rubber based adhesive residue free. Blue silicone coated polyethylene release liner allows for complete, tear free liner pull and removal. Exhibition carpet tape removable natural colored cotton/polyester blended cloth coated on both sides with a high shear.

 

Polyken 105CNAT136 105C Multi-Purpose Double Coated Carpet Tape 1 x 36 yd Natural #ad
Polyken 105C/NAT136 105C Multi-Purpose Double Coated Carpet Tape: 1″ x 36 yd, Natural
Polyken 105C/NAT136 105C Multi-Purpose Double Coated Carpet Tape: 1″ x 36 yd, Natural #ad - Service/operating temperature 40°f to 200°f outdoor yes indoor yes moisture resistant yes standards met boeing bac5034-4 section 51a(1)(a) can contribute toward satisfying eq credit 41 (low emitting materials) under leed core 3 inch diameter. Premium quality, double-sided tape on a cloth carrier that can be removed cleanly from most surfaces with no leftover residue the residue-free easy removal feature makes the tape popular as a temporary flooring and carpet hold-down in exhibition and convention halls it’s the perfect answer when you need short-term special event flooring and must leave a clean surface behind the residue-free easy removal feature makes the tape popular as a temporary flooring and carpet hold-down in exhibition. Note before applying this double-coated tape to a surface area, first test it in a small, inconspicuous area to ensure that it can be removed as desired this tape is designed to not leave adhesive residue behind however, depending on certain conditions such as chemical cleaners used on the floor, length of time and the substrate’s composition, it may still pull up loose debris or finish from the surface. Adhesive rubber carrier/backing cloth release liner low-density polyethylene (ldpe) film thickness 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner) adhesion 40 ounces per inch (to stainless steel test panel) tensile strength 20 pounds per inch (longitudinal). Tape rolls are typically cut to standard tape industry metric-cut sizes, or approx 5% narrower than the nominal size (ie 24mm per 1-inch of nominal width ordered) polyken 105c carpet tape comes on a blue film liner for added visibility when used over a large area for the same product on an easy to use paper release liner, try polyken 105c-p, consider this for smaller jobs.

 

3M Double Coated Tape 444 Clear 1 in x 36 yd 39 mil 36 rolls per case #ad
3M Double Coated Tape 444, Clear, 1 in x 36 yd, 3.9 mil, 36 rolls per case
3M Double Coated Tape 444, Clear, 1 in x 36 yd, 3.9 mil, 36 rolls per case #ad - 55# 32 mil densified kraft liner makes for easy release. Excellent for foam and gasket attachment, hse and lse plastics such as polyethylene. 3m adhesive 300 aggressively bonds to many surfaces, including plastics like polyethylene. 05 mil pet film carrier adds dimensional stability and easier handling during slitting and diecutting. Quick flowing adhesive delivers high initial adhesion for faster lamination.

 

3M 9088 5-9088-34 Clear Acrylic High Performance Double Coated Tape 00083 Thick 075 Length 075 Width Pack of 5 #ad
3M 9088 5-9088-3/4 Clear Acrylic High Performance Double Coated Tape 0.0083″ Thick, 0.75″ Length, 0.75″ Width (Pack of 5)
3M 9088 5-9088-3/4 Clear Acrylic High Performance Double Coated Tape 0.0083″ Thick, 0.75″ Length, 0.75″ Width (Pack of 5) #ad - Resists solvents, uv rays, and plasticizers. Excellent adhesion to both high and low surface energy substrates. Excellent initial adhesion. Used for high performance bonding typically with pop displays, metal fabrication, indoor/outdoor signs, blister packs and nameplates. High level adhesive peel and shear performance.

 

3M 9738 Double Coated Tape 9738 Clear 12 mm x 55 m #ad
3M (9738) Double Coated Tape 9738 Clear, 12 mm x 55 m
3M (9738) Double Coated Tape 9738 Clear, 12 mm x 55 m #ad - Carrier/backing foamed acrylic adhesive ultra-high bond acrylic release liner red polyethylene film thickness 433 mils (carrier, adhesive). The pressure-sensitive acrylic composition has very good tack has excellent adhesion to a variety of surfaces and has high shear strength performance the tape is carried on a red, release coated polyethylene liner that is easily removed has good uv resistance the dwell time the tape needs to be in contact with both surfaces before it reaches its maximum adhesion is 1 to 24 hours. Adhesion 139 ounces per inch (to stainless steel test panel) tensile strength 85 pounds per inch (longitudinal) service/operating temperature -40f to 212f dynamic shear strength 85 pounds per square inch short term temperature resistance up to 320f core 3-inch diameter plastic. The tape will bond to most surfaces including many plastics, composites, sealed woods, and metals however thorough evaluation is recommended when bonding to low energy surface material such as polyethylene, polypropylene, silicones, and teflon for lower energy surfaces may need to use an adhesive promoter/primer such as ipa (isopropanol) on the substrate prior to application. Jvcc uhb45fa-g ultra high bond double coated tape is constructed of a grey foamed acrylic system which has excellent all-around bonding properties which allows for very high performance in the most demanding of applications ideal for structural bonding applications in the transportation industry used in automotive aftercare market and in body shops for crash repair as well as mounting/fixing car side molding and emblems.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.